An efficient job starts with a sharp blade
The hardened steel blades, optimized edge angles and the high knife speed increase productivity when trimming.
Better result in less time
The integrated leaf catcher on our single-side hedge trimmers helps to remove clippings while cutting which means less time spent after-cleaning
Long life gear components
The gear components have been developed for long life under tough condition.
Two-stage air filter
The unloosable two-stage air filter in dual materials provide less cost for service and less engine wear.
Sharp and robust cutting teeth for high productivity and long product life.
Auto return stop switch
Stop switch automatically resets to the ON position for trouble-free starting.
Starting a cold engine is easier with the intuitive choke which is easy to reach and set
Low noise engine
Effective low noise engine creates less disturbance in the work area
|Cutting speed||4400 cut/min|
|Cylinder bore||32 mm|
|Cylinder displacement||21.7 cm³|
|Cylinder stroke||27 mm|
|Electrode gap||0.5 mm|
|Fuel consumption||620 g/kWh|
|Fuel tank volume||0.45 l|
|Idling speed||3000 rpm|
|Ignition module air gap||0.3 mm|
|Maximum power speed||7800 rpm|
|Power output||0.6 kW|
|Spark plug||NGK CMR6A|
|Equivalent vibration level (ahv, eq) front handle||5.8 m/s²|
|Equivalent vibration level (ahv, eq) rear handle||5.7 m/s²|
|Knife Length||75 cm|
|Teeth opening||30 mm|
|Sound and Noise|
|Sound power level, guaranteed (LWA)||102 dB(A)|
|Sound pressure level at operators ear||93 dB(A)|